Owner's Manual

 4
Turnonyour PC and plug the modem intotheUSB interface slot to begin software
installation. Windows should automatically detect the new device and will prompt
youtobegininstallation.

Afterfollowingthepromptsofinstallationsetup,uponcompletion,ashortcutwillbe
placedonyourdesktopforquickfutureaccess.
Note:
1. If installation “auto‐run”  does not begin, you will need to locate the
“autoRun.exe)” file in the driverpath, and Double‐Click onAutoRun.exetorun
theinstallationmanually.
2. AMicro‐SDcardisanoptionalaccessory.
3. Please do not remove the USIM/SIM card or the Micro‐SD card when the
modemisinuse.

UponsuccessfulinstallationoftheUSBmodemprogram,theprogramwilllaunch
automatically.Youmayalsodouble‐clicktheshortcuticononthedesktoptolaunch
theprogram.

2.2InstallationGuideforMac
Thismanualdescribestheoperationsoftheconnectapplication.
ThisapplicationrequiresMACOSX10.4.9or10.8

1. To install the modem connect applicationon MAC OS X. Please double‐click the
fileMyConnection.pkg
2. ClickContinue
3. SelectthePartitiontoinstallthe applicationandclick“ContinueInstallation”
4. When the installation is finished, you needto restart your computer to use the
modem.
5. Clicking Application>My Connection to start the connect application. You may
reservethisapplicationintheDocktoaccessitfaster.

3.MainInterfaceOverview
ShortCutIcons
FollowingtablearelistedShortCutIconsinPCSuiteInterface.

InterfaceIcons ProvidedServices