User Manual 1
Safety Precautions Read the safety precautions carefully to ensure the correct and safe use of your wireless device. Do not switch on your device when the device use is prohibited or when the device use may cause interference or danger. Follow the rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatus. Switch off your device in an aircraft. The device may cause interference to control signals of the aircraft.
Content Safety Precautions....................................................................................................... 2 1. Web UI configuration............................................................................................. 54 1.1 login the configuration page .............................................................................. 54 1.2 Icon description ................................................................................................... 54 2. Quick Setup ......
1.1 login the configuration page ................................................................................ 4 1.2 Icon description ..................................................................................................... 4 2. Quick Setup .............................................................................................................. 4 3. Connection ............................................................................................................... 4 3.
带格式的: 字体: Arial 1. Web UI configuration 1.1 login the configuration page Open the browser, and then input the address http://192.168.1.1. The default login password is admin. 1.2 Icon description The icon description as bellow: Category Icon Display Signal Strength Connection Status SMS From no signal to excellent Disconnect disable, Connected enable, Battery Wi-Fi status SMS is full, Unread From lowest power to full power Wi-Fi is active Tab 2.1 2.
network connection as well as the Access Point Name (APN). Network: choose and set up preferred network settings. PIN Code management: manage PIN, enable/disable/change/verify; Connection Mode: Set the dial mode of this device, default is auto. 3.
2, Click ; 3, On the pop up dialog ”are you sure to delete this profile?”,click ; Note: the default profile can not be deleted. Set as default: 1, Select the profile from the connection profile list; 2, Click ; 3, On the pop up dialog ”are you sure to set this profile as default?”, click . Note: Once set the profile as default,(D) will be added as a mark. 3.
Manual: The device dials to connect to Internet by clicking Connect button in the connection page. Auto: The device dials automatically to connect to Internet when user turn it on. Default is Auto. Auto connect in roaming 带格式的: 正文, 首行缩进: 0 字符 4. SMS You can move the mouse to "SMS" and click the items you want. In this section, the following items are included: New: write the new SMS; Read: list the SMS received; Sent: list the SMS sent successfully. Draft: save the SMS not sent or sent failed.
4,Click ; Delete SMS 1,Left click the Mark of the SMS you want to delete; 2,Click ; Delete all SMS 1,Click ; 2, Click ; SMS settings SMS Center Number: You can get it from your operator; SMS Save Mode: the location SMS stored, default is SIM card; 5. Settings You can move the mouse to "Settings" and click the items you want.
Recommended only if your devices don't support WPA or WPA2. WPA: A strong security standard, supported by most Wi-Fi devices. 8 to 63 ASCII characters needed. WPA2: A stronger, newer security standard. Limited to newer Wi-Fi devices. 8 to 63 ASCII characters needed. 5.2 WPS WPS (Wi-Fi Protected Setup) provide a more intuitive way of wireless configuration between your device and the wireless client. Please make sure that the client support WPS.
the network. The default setting is “Enable”. DHCP IP Pool: Set a range of IP addresses available to access. DHCP Lease Time: Amount of time that a Wi-Fi enabled device can use its assigned IP address before it is required to renew the lease. MAC Filtering: MAC filtering is used to control specific MAC addresses to access. Select “Disable" : All terminal devices are allowed to access the network. Select “Enable": Only devices in this list are allowed to access the network.
You have many ways to charge your device - the magnetic attraction of the device ensures that the ONE TOUCH Y855 maintains close contact with your Wall Charger Wall Charger charging: Plug Wall Charger into power socket, plug the USB cable into the USB charging port on the Wall Charger then connect the ONE TOUCH Y855 by USB cable. Charging will then begin. When the device is powered off, charging will take a maximum of 3 hours.
4) Accidents or consequences of theft of the vehicle in which this device is transported, acts of vandalism, lightning, fire, humidity, infiltration of liquids, inclement weather, 5) Connecting to or integrating into this device any equipment not supplied or not recommended by the manufacturer, 6) Any servicing, modification or repair performed by individuals not authorised by the manufacturer, the vendor or the approved maintenance centre, 7) Use of this device for a purpose other than that for whic
Which browser does this device support? It supports the below: 带格式的: 左, 不调整西文与中文之 间的空格, 不调整中文和数字之间的 空格 带格式的: 正文, 不调整西文与中 文之间的空格, 不调整中文和数字之 间的空格 1. Firefox 2. Safari 4.0.2 to 7.02 3. Internet Explorer 7.0 to 11.0 4. Opera 5. Chrome Which Operating System does the device support? It supports the below: 1. Windows XP 2. Windows Vista 3. Windows 7 and 8 4. Mac OSX 10.5 to 10.9 How to connect to the device? 1. Open your Wireless Network Connection list 2.
1. Select Settings 2. Select WiFi 3. Choose the SSID from the available Networks For an Android device: 1. Select Settings 2. Select Wireless Controls 3. Select WiFi Settings 4. Choose the SSID from the available Networks What to do if I see the SSID but the device fails to connect? 1. Check you have entered your correct password 2. Select the Power Button to light the screen to check the number of WiFi connected (the maximum users permitted is 10 users ) 3.
Why does the SSID not appear in the wireless network list? You can check the below to ensure it is set up correctly: 1. Check the device Status Display for any error messages or information 2. Refresh your Network list on your computer, to do this please follow the below instructions For Windows: 1. Click Refresh Network List on the left hand side of the Wireless Network Connection screen 2. Open Network Connections 3. Right click Wireless Network Connection, then select Properties 4.
1. Login to the Configuration Page (refer to How do I access the Configuration page) and enter your PIN Code or PUK code, you can obtain these by contacting your Network provider (Note: if you enter the incorrect PIN 3 times then a PUK code would be required and if the incorrect PUK code is entered incorrect 10 times then the SIM card will be locked) How do I find out the Network Technology and Network Provider currently in use? 1.
3. Select Connection Status 4. Select Disconnect How do I set a new PIN for my SIM card? 1. Login to the Configuration Page (refer to How do I access the Configuration page) 2. Select Connection 3. Select PIN Code Management Where can I find information about Internet Connectivity and WiFi Setup? 1. Login to the Configuration Page (refer to How do I access the Configuration page) 2. Select Connection 3. Select Connection Status How to check usage data? 1.
4. Choose Manual from the Network Selection list 5. Click Apply 6. Click Refresh How to check the model number and firmware versions of my device? 1. Login to the Configuration Page (refer to How do I access the Configuration page) 2. Select Settings 3. Select System 4. Select Device Information How to backup and restore your Configuration Settings? 1. Login to the Configuration Page (refer to How do I access the Configuration page) 2. Select Settings 3. Select System 4.
2. Select Quick Setup 3. Select WiFi Settings 4. Select SSID How to change the login password? 1. Login to the Configuration Page (refer to How do I access the Configuration page) 2. Select Quick setup 3. Select Admin Password 4. Select Login Password How do I change the WiFi Key? 1. Login to the Configuration Page (refer to How do I access the Configuration page) 2. Select Quick Setup 3. Select WiFi Settings 4.
Do not use your wireless device at places for medical treatment where wireless device use is prohibited. Storage Environment Do not place magnetic storage media such as magnetic cards and floppy disks near the wireless device. Radiation from the wireless device may erase the information stored on them. Do not put your wireless device and other accessories in containers with strong magnetic field, such as an induction cooker and a microwave oven.
on top of the dashboard or within an airbag deployment area. Check with your car dealer or the car manufacturer to make sure that the dashboard is adequately shielded from this device RF energy. Conditions of Use Switch this device off before boarding an aircraft. Switch this device off when you are in health care facilities, except in designated areas.
Collection bins at points of sale. They will then be recycled, so that their components can be reused, and to prevent substances being disposed of in the environment. In European Union countries: These collection points are accessible free of charge. All products with this symbol must be brought to these collection points.
