Installation & Assembly

ASSEMBLY INSTRUCTION

NOTE: Please consult a qualified electrician if you are not certain of the installation.

CAUTION: Before starting the installation, disconnect the power by turning off the circuit breaker or by

removing the fuse in the fuse box.

1. Open the part bag, then pull the power supply wires out from the post and the fixture wires out from

the fixture body, and attach the wires together by connecting black to black and white to white.

Attached the power supply ground wire to the fixture ground wire. Cover connection using wire

connector.

2. Secure the fixture body to the post using the fasten screws provided（three Pcs）.

3. Install the bulb (not included).

4. Place the six pieces glass and attach into fixture body. Use the screws and rubber washers provided to

attach the top cover onto fixture body.

PAGE 1
ASSEMBLY INSTRUCTION NOTE: Please consult a qualified electrician if you are not certain of the installation. CAUTION: Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the fuse in the fuse box. 1. Open the part bag, then pull the power supply wires out from the post and the fixture wires out from the fixture body, and attach the wires together by connecting black to black and white to white.
PAGE 2
INSTRUCCIÓN DE ASAMBLEA NOTE : Por favor, consulte con un electrcista cafificado en caso de que no esté seguro de la instalación. CAUCIÓN : Antes de comenzar la instalación, cortar la electricidad mediante apagar el cortacircuitos o quitar el fusible desde la caja de fusible. 1. 2. 3. 4. 5.