Instruction Manual

Fig. 22

Fig. 23

INSTALLING THE BASIC FUNCTION

WALL CONTROL SYSTEM WALL

PLATE

Select a location to install the Basic Function Wall Control System

Transmitter and Wall Plate.

Install the wall plate using an existing wall switch outlet box. Make

sure the electrical power is TURNED OFF at the main panel before

continuing.

Step 1. Remove the existing wall plate and the old switch from the

wall outlet box. Wire nut the BLACK leads (hot) together and push

back inside the outlet box. (Fig. 22)

Step 2. Install the wall plate on the existing wall outlet box using the

screws provided. (Fig. 23)

After installing the wall anchors, attached the wall plate with the

mounting screws to finish the installation.

Wall plate

Switch

Outlet box

Screws

Outlet box

Screws

Wall plate

Switch