Installation & Assembly

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .
ASSEMBLING THE FIXTURE (Fig.1).
1. Carefully unpack new fixture and lay all the parts on a
clear surface.Take care not to lose any small parts
necessary for installation.
2. Slip the threadlike bolt of the lamp body(A) in side,
open the window. Put the candle sleeve(B) over the
lamp holder.
3. Install the light bulbs (No Included) in accordance with
the fixture's specifications. DO NOT EXCEED THE
MAXIMUM WATTAGE RATING! Close the
window.
4. Attach the assembly lamp body onto the post (D, no
included) and lock it securely with the screw (C).
Wiring (Fig.2)
1. Connect the electrical wires as follows. Connect the
black wire from the fixture to the black house (hot)
wire. Connect the white wire from the fixture to the
white (neutral) house wire. Make sure all wire nuts are
secured. You may wrap the connections with electrical
tape. If your outlet box has a ground wire (green or
bare copper) connect fixture’s ground wire to it.
Otherwise attach the bare copper fixture wire to the
green ground screw on the circular strap.
2. Tuck the wire connections neatly into the junction
box.
Your installation is now complete. Return power to the
junction box and test the fixture.
Fig.1
Fixture
Ground Wire
A
B
Fig.2
White or
HOUSE
Black
WIRES
(Hot)
Smooth
FIXTURE
WIRES
Black or
Ribbed
WIRES
FIXTURE
Bare Coppe
(Neutral)
WIRES
White
Green o
WIRES
r(Ground)
FIXTURE
WIRES
Copper
(Ground)
HOUSE
Bare
r
HOUSE
Listed
U
L
R
ASSEMBLING & INSTALLATION INSTRUCTIONS
OUTDOOR POST MOUNT LIGHT FIXTURE