Instruction Manual

sockets these are low-voltage light bulbs that are built and designed for our
products only!
Tools that are needed but not supplied with the high post lamps are: a screw driver, a wrench
and an electrical drill that will be used to anchor the lamp base to the ground.
Solar Lamp Post Location
For optimum light duration throughout the night, it is very important to mount your solar lamp
post in a spot where it will receive the maximum amount of sunlight throughout the day.
NOTE: The following steps are for reference only. Consult your local hardware store for the
best installation method for your particular surface.
NOTE: The solar light must be charged for two sunny days for best results on the “Economy
(I)” position.
Operation Instructions for all models
1. Unscrew the two knobs in the upper part of the lamp (B) to detach it from Part
A.
2. Turn ON the operation switch by choosing your desired brightness level:
Economy (I) - last longer using dimmer light. High (II)- Brighter light output.
(Fig. 1).
3. Reassemble the upper part of the lamp (B) by screwing the two knobs.
WARNING: These Light bulbs are not to be used in other electrical