Assembly instructions Caution: You must read this before you proceed. Table CAUTION: This table is NOT a TOY. Keep your child / children at bay in the process of assembly. Parts list NO.
Hard ware Description QTY ① Stud(M8*32mm) 5 ② Washer(M8mm) 5 ③ Spring Washer(M8mm) 5 ④ Nut(M8mm) 5 ⑤ Bolt(M6*27mm) 9 ⑥ Spring Washer(M6mm) 9 ⑦ Washer(M6mm) 9 ⑧ Spanner 1 ⑨ Screwdriver 1 ⑩ Nut Cap(M6) 9 Label Picture Assembly Preparation Before Beginning Assembly: 2 OF 5
Assembly Step Overview Table Top(A) Legs Support(B) Leg with preattached Leveller(C) FRONT FACING This table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Unpack and place all parts onto a clean soft surface.
⑦ ⑥ ⑤ C B ⑧ Loosely attach the Legs support(B) to Leg with pre-attached Leveller(C) with Bolt(⑤), Spring Washer(⑥) and Washer(⑦) using Spanner(⑧). Repeat the same process for all contact points of the Table Legs and Legs Support. DO NOT OVERTIGHTEN. Adjust height for balance Adjust low for balance Stand the table right side up. Now, fully and securely, tighten all nuts, at all joints. Adjust the Legs pre-installed Levellers until the table is level with the ground.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposuresto chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can bein the products that Californians purchase, in their homes or workplaces, or that are released intothe environment.