Installation Instructions

ALD-1076436

C. Controlling the rotation area (presence / absence of obstacles).

Important : To check the rotation area, open all the roof vents.

1. Install the unit on the roof on the chosen location, the LNB has to be folded towards the back of the vehicle.

2. By using a pencil, mark the location of the unit, then remove the unit.

3. Mark the center of the drawing.

4. Cut a piece of string of 60 cm long. Place one end at the center of the drawing. Stretch the string of 60

cmand bring it round (a complete circle) to make sure no obstacle is in the way when the dish will rotate.

5. If no obstacle is in the way, proceed with the glueing; if not, change the location of the satellite system and

start the same procedure as in step 4.

D. Gluing.

IMPORTANT INFORMATION CONCERNING SIKA’S PRODUCTS :

Sikaflex

-521 UV is a single component hybrid sealant PU based on silane-terminated polymers. It cures

on exposure to atmospheric moisture to form a durable elastomer. Sikaflex

-521 UV is manufactured in

accordance with quality assurance rules ISO 9001 and 14001 and the «Responsible Care» program.

Expiration date are indicated as following: month/year. Example : 03/09 corresponds to March of the year

2009.

Warning: May cause sensitization by inhalation. Do not breathe gas/fumes/vapour/spray. In case of accident

or if you feel unwell, seek medical advice immediatly (show this document where possible).

Warning: ALDEN SAS Services declines all responsability if these instructions are not respected.

Carefull: During the drying time, the vehicle must stay parked once you have glued the unit.

Attention:

• Only the supplied gluing kit answers the ALDEN SAS Services security requirements.

• Inform the customer of the dangers in case of strong winds. Only start the vehicle once the unit is

folded down.

• The warranty will become void if these rules are not respected.

methylenediphenyl diisocyanate