Operation Manual

5 OTHERS

5.1 LINK CHECK:

As soon and as long the parent unit is in contact with the

baby unit, the link-LED on the parent unit lights stea-

dily.

When the baby unit gets out of range (or is powered off),

the link-LED

on the parent unit starts blinking and the

text [ SEARCHING ] comes on the display. In case the

link is not restored within 30 seconds, a beeptoon sounds

every 10 seconds and the text [ NOT LINKED ] comes on

the display.

Once the link between the parent unit and the baby unit is

restored, the link-LED will light steadily and the text [ NOT

LINKED ] will disappear from the display.

Also during the power up of the units, the link-LED will

blink for a couple of seconds in which period the units are

looking for each other. When the link is made, the LED will

light steadily.

Attention: the link check does not function when the FULL

ECO MODE is set. The link-LED than only lights when the

parent unit actually receives noise from the baby unit; in

idle state this lamp is OFF during FULL ECO mode, even

when the units are in range.