Operation Manual

33
In case the babyphone still does not operate correctly,
please disconnect the power adapters and remove the
batteries. Wait for some minutes and install batteries and
connect the power adapters again. In case the malfunc-
tion still persists, please contact your dealer.
The parent unit
is too sensitive
to room sounds
The baby
monitor system
produces a
high-pitched
noise
Alkaline batte-
ries in the baby
unit are running
low quickly
Rechargeable
batteries in the
parent unit are
running low
quickly
Talk back
feature is not
working
The microphone sensitivity level of the baby unit may
be set too high. Decrease the microphone sensitivity
level of the baby unit from the parent unit.
The parent unit and the baby unit are too close to
each other. Make sure the parent unit and baby unit
are at least 1.5 metre away from each other.
The speaker volume of the parent unit maybe set too
high. Decrease the volume of the parent unit.
The microphone sensitivity level of the baby unit may
be set too high which causes the baby unit to transmit
more often. Decrease the microphone sensitivity level
of the baby unit from the parent unit.
The volume level of the baby unit may be set too high
which consumes power. Decrease the volume level of
the baby unit.
The volume level of the parent unit may be set too
high which consumes power. Decrease the volume
level of the parent unit.
Check that the volume is loud enough at the baby unit.
•
•
•
•
•
•
•