User manual

- 54 -
7.4 ADDITIONAL SETTINGS AND FUNCTIONS
Press the button in the overview screen to open the additional settings and functions. You may adjust the
following functions in the settings screen:
(the description of the icon may differ somewhat, depending on the operating system).
Camera name: To enter a camera name or to edit the camera name.
Camera password: To change the camera password when entered incorrectly.
Change password: To change the password of the camera.
WiFi Networks: To change the WIFI network on which the camera is registered.
Notication interval: To select the interval between notication messages.
Recording mode: To determine how video must be recorded in the internal memory (8G) of the camera:
Off. No recording.
Continuous recording. Always record
During alarm notication. Only record upon ringing the doorbell and/or motion detection (the alarm
setting must be activated)
Time zone: to enter the correct time zone for the correct time. For the Netherlands during winter time
GMT+1 and during summer time GMT+2.
Format SD card: To format the internal memory of the camera.
Attention: All recordings are erased.
Alarm setting: This setting must be used to send notications to your smartphone or tablet. This
setting contains the following functions:
- off: no notication
- on/low: notication only when the doorbell pusher is pressed.
- on/medium: notication when the doorbell pusher is pressed and low motion detection
- on/high: notication when the doorbell pusher is pressed and medium motion detection
- on/max: notication when the doorbell pusher is pressed and maximum motion detection
Camera info: Provides information about the camera and the internal memory.
Reconnect: This restores the connection in case of a connection error.
Remove this device: To remove the camera from the app.