Operation Manual

24
SPECIFICATIONS
Supply: AC115V / 230V, 50 / 60Hz±10% switchable
Battery Voltage: DC 24V (MAX 10 % deviation)
Outputs: Speaker outputs: 8 Ohm, 25V, 70V, 100V
PAX-30: Rated 30W max. 45W
PAX-120: Rated 120W max. 180W
Tape out: 350mV, 4,7KOhm
Inputs: Mic1~Mic3: 1mV, 250Ohm balanced with phantom
power selectabel.
Aux1: 200mV, 47KOhm, unbalanced.
Aux2: 500mV, 47KOhm, unbalanced.
Line (Mic3): 200mV, 47KOhm, balanced.
TEL: 0.1~1V, 600Ohm, adjustable, balanced.
Power in: 1V, 47KOhm, unbalanced
Frequency response: Mic1~Mic3: 60Hz ~15KHz ±3dB
Aux1~Aux2: 60Hz~15KHz ±3dB
TEL : 100Hz ~ 15KHz ±3dB
Total harmonic distortion: Less than 1% at 1KHz, rated power
Signal to noise ratio: All volume controls C.C.W.:75dB below rated power
Mic1 ~ Mic3: 60dB below rated power
Aux1 ~ Aux2: 70dB below rated power
TEL: 70dB below rated power
Tone controls: Bass: ± 10dB at 100Hz
Treble ± 10dB at 10KHz
Controls: Mic1 ~ MIc3 volume control
Aux1 ~ Aux2 volume control
Master volume control
Tone controls (Bass, Treble)
TEL input level control
Mic3(Line-Mic) selector switch
Chime on/off switch
AC 115V/230V voltage selector switch
Indicators: Power indicator (LED), output level indicators (3 LED)
AC power consumption: PAX-30 = 90 Watts PAX-120 = 360 watts
DC power consumption: PAX-30 = 2 A PAX-120 = 8A
Priority (VOX): Priority level (Using for mic1, the 5 pole DIN
connector, phone jack or XLR connector). TEL/EMER
(3), Mic1 (2), Mic2 (1), Mic3 (1), and Aux/CD (1).
Dimentions ( H x W x D ): 88 x 430 x 260 mm
Weight: PAX-30 = Approx 6.5Kg PAX-120 = Approx 9.5Kg
Color: Black