MSDS

iLoveToCreate Material Safety Data Sheet – Aleene’s Original Tacky Glue
Page 3 of 6
9. PHYSICAL AND CHEMICAL PROPERTIES
Pure Material or Mixture:
Mixture
Physical Form:
Liquid
Appearance / Physical Description:
White liquid, slight sweet odor
pH:
4 - 5
Boiling Point:
> 100
o
C (> 212 F)
Melting / Freezing Point:
Approx. 0
o
C (32 F)
Odor Threshold:
Not Available
Solubility in Water:
Miscible
Partition Coefficient (n-octanol/water):
Not Applicable
Specific Gravity (Water = 1):
1.08
Bulk Density:
9.0 lb / gal
Volatiles:
Approx. 50% / wt
Vapor Pressure:
17.5 mm Hg @ 20
o
C (68
o
F)
Evaporation Rate (Water = 1):
1
Vapor Density (Air = 1):
0.62
Volatile Organic Compounds:
Estimated 0.045 lb/gal
Autoignition Temperature:
Unknown
Flash Point:
> 100
o
C (> 212 F)
Oxidizing Properties:
Not Applicable
10. STABILITY AND REACTIVITY
Stability:
Stable
Materials to Avoid:
Strong oxidizers, materials that react with water
NFPA Reactivity Class:
0 = Insignificant
Conditions to Avoid:
Protect from temperatures below 40 F
Hazardous Polymerization:
Will not occur
11. TOXICOLOGICAL INFORMATION
Acute (Short-Term) Effects of Exposure
Route of Entry
Eye contact, skin contact, inhalation, ingestion
Acute Effects – Eye:
Slight, transient
Acute Effects – Skin Contact:
No known signs or symptoms associated with exposure to product
Acute Effects – Inhalation:
No known signs or symptoms associated with exposure to product
Acute Effects – Ingestion:
No known signs or symptoms associated with exposure to product
Chronic (Long-Term) Effects of Exposure
Effect of Chronic Exposure:
The toxicological properties of this product have not been fully
evaluated. Use of good industrial hygiene practices is required.
Avoid direct contact with skin or eyes. Do not ingest or inhale.
Product is unlikely to cause harmful effects under recommended
conditions of handling and use.
Target Organs:
Not applicable
Carcinogenicity:
None
12. ECOLOGICAL INFORMATION
Potential to Bioaccumulate:
Unknown
Aquatic toxicity:
None established