User's Manual

21
USING DETERGENTS
ADJUSTING THE PRESSURE
To adjust the pressure,proceed as follows:
1. Hold the shaft of the lance in one hand.
2. Turn the grey part of the nozzle clockwise
(to “+” end) to obtain the high pressure.
3. Turn the grey part of the nozzle anticlockwise
(to “-” end) to obtain the low pressure.
TOTAL STOP SYSTEM
The pressure washer is fitted with a total stop system to protect the motor when in use.
When the trigger is released the motor will stop.
When the trigger is squeezed the motor will start up again.
Biodegradable detergents are specifically formulated to protect the environment and
your pressure washer. These Detergents will not clog the filter and will protect the
internal parts of the pressure washer for a longer life.
Step 1
Open the cover of the detergent bottle by twisting it off.
Step 2
Fill the detergent bottle with any approved liquid detergent.
Close the cover.
1600 PSI Pressure Washer
Low Pressure Setting
High Pressure Setting
Detergent nozzle
Detergent bottle