User's Manual
41
CLEAN-UP AND STORAGE
Shutting Down the Pressure Washer
WHEN FINISHED USING THE PRESSURE WASHER,FOLLOW THESE
STEPS TO SHUT DOWN THE UNIT:
• Turn the pressure washer to the OFF position.
• Turn off the water supply.
• Before disconnecting high-pressure hose connection, point the gun in a
safe direction and discharge the high-pressure water.
• Disconnect high-pressure hose from the pressure washer and gun.
• Disconnect garden hose from the pressure washer.
• Remove excess water from the pump by tipping the unit on both sides to
drain any remaining water from inlet and outlet fittings.
• Remove Water Intake Filter and flush with water to remove dirt or debris.
Return filter once cleaned.
• Drain detergent reservoir and flush with running water.
• Wipe away any remaining water on all parts and fittings.
• Engage the gun safety lock.
• Store the pressure washer, parts, and accessories in an
area with a temperature above 0°C (32°F).
1600 PSI Pressure Washer