AI 020152

CANOPY MOUNTING INSTRUCTION
Canopy
Collar loop
Collar loop ring
Easy link (2pcs)
Chain
WARNING
Electrical Danger
Turn Power Off
All electrical components must be
installed by a licensed electrician in
accordance with the National
Electric code and the appropriate
local electrical codes.
c
R
INSTALL CANOPY AS FOLLOWS
CAUTION: Be sure power is off at the main
breaker box prior to installation.
1. Drill a hole on main ceiling beam and pass
Solid Nipple through.
2. Place Washer and Hex Nut on top of Solid
Nipple to hold.
3. Take Outlet Box through Solid Nipple and
screw Plate Hickey, then screw Plate Hickey to
main ceiling beam with 4 screws.
4. Secure the Washer and Hex Nut to Solid
Nipple from top side of main ceiling beam.
5. Screw Collar Loop to Nipple as shown, raise
Canopy flat to ceiling and secure it with Collar
Loop Ring.
6. Hang Chain to Collar Loop with the Easy Link,
Proceed to fixture frame assembly Step 1.
WWW.ALLEGRICRYSTAL.COM
800.525.2655
Metal lathe
Metal lathe
Glass tray
Solid Nipple
Hex nut and washer
Screws
Outlet box (by others)
Plate Hickey
P3