User`s manual

2
INTRODUCTION
This manual provides instructions for the use and maintenance of Allegro Industries
Axial Blowers. You must read and understand this manual and be trained in the proper
use of the equipment before using it in a contaminated atmosphere.
There are many federal, state and local codes and regulations governing sales,
construction, installation and/or use of products for certain purposes which may vary.
Allegro cannot be responsible for how the products are used and installed. Before
purchase and use, the buyer must review the product application, and be sure that the
product installation and use will comply with those regulations.
For more information and assistance on Allegro Industries products, contact Allegro
Technical support toll free at 1-800-622-3530 or e-mail at: [e-mail]
DESCRIPTION
Allegro Axial Blowers are designed to offer high output CFM in easy-to-use portable, air-
over-motor configurations. They are available in outputs from 778 up to 7500 CFM of
free air. Axial blowers are available in a range of styles, sizes and power. For
Explosion-Proof Blowers, the receptacle should be installed by qualified personnel and
is sold separately (P/N 9503-03). Blowers include:
9509 Standard Axial 12” Blower
9509-01 Explosion Proof 12” Axial Blower
9509-50 High Output Axial 12” Blower
9509-50AU High Output Axial 12” Blower*
9509-50E High Output Axial 12” Blower*
9513 Standard Axial 8” Blower
9513-05 Explosion Proof 8” Axial Blower
9513-AU Standard Axial 8” Blower *
9513-E Standard Axial 8” Blower *
9514 Standard Axial 8” Blower with 15’ Ducting Canister
9514-05 Explosion Proof 8” Axial Blower with 15’ Ducting & Canister
9514-06 Explosion Proof 8” Axial Blower with 25’ Ducting & Canister
9514-25 Standard Axial 8” Blower with 25’ Ducting & Canister
9514-25AU Standard Axial 8” Blower with 25’ Ducting & Canister*
9514-25E Standard Axial 8” Blower with 25’ Ducting & Canister*
9514-AU Standard Axial 8” Blower with 15’ Ducting & Canister*
9514-E Standard Axial 8” Blower with 15’ Ducting & Canister*
9515 Standard Axial 16” Blower
9515-01 Explosion Proof 16” Axial Blower
9515-AU Standard Axial 16” Blower*
9515-E Standard Axial 16” Blower*
9516 High Output Axial 16” Blower
9525 Standard Axial 20” Blower
9525-01 Explosion Proof 20” Axial Blower
9525-50 High Output Axial 20” Blower
9525-E Standard Axial 20” Blower* (cont’d)
* Models available in 220V/50Hz