Installation Guide

5
INSTALLATION INSTRUCTIONS
4. Apply adhesive (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess adhesive before allowing
to dry.
4
1
2
2
C
B
3. To install the stone top with assembled sink to
the vanity (A). Apply silicone adhesive to the
top edge of the wood cabinet. With the help
of another adult, gently lower the stone top
with assembled sink onto the cabinet. Make
sure the stone top is flush with the back side
of the wood cabinet and the stone overhang is
equal on both sides over the wood cabinet left
and right side walls. Remove any excess
adhesive before allowing to dry.
Tip: it may be easier to install the faucet and/or
drain assembly (not included) before
securing the stone top to the wood cabinet.
3
1
A
B
2
2