welcoming allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. • sophisticated • inspiring ITEM #0982659 3-LIGHT DECORATIVE RAIL LIGHT MODEL #16103 Français p. 9 Español p. 17 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.
PACKAGE CONTENTS B A F C E D PART A B C D E F DESCRIPTION Canopy Mounting Bracket LED Assembly (preassembled to Arm (F)) Shade Socket Ring (preassembled to LED Assembly (C)) Arm (preassembled to Canopy (A)) 2 QUANTITY 1 1 3 3 3 1
HARDWARE CONTENTS (shown actual size) AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 CC DD Threaded Knob Qty: 2 Long Machine Screw EE U-Tool Qty: 1 Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated assembly time: 30 minutes to 1 hour Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder, safety glasses. ASSEMBLY INSTRUCTIONS 1.
ASSEMBLY INSTRUCTIONS 2. Wire connection guide: Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 4. Remove socket ring (E) from socket (C). Pass shade (D) over LED assembly (C) and secure with socket ring (D) using U-tool (EE). 4 Repeat for each socket (C). Hardware Used EE x1 U-Tool C E EE CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish.
WARRANTY The Distributor warrants that its products will be free from defects in material and workmanship for three (3) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Distributor the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday. PART B D E AA BB CC DD EE DESCRIPTION Mounting Bracket Shade Socket Ring Wire Connector Short Machine Screw Threaded Knob Long Machine Screw U-Tool PART # XBAR05 G16103 SR16102 WC001 SCR832X050 TK2X832-AP SCR832X150 UT16102 B AA D BB E DD CC EE Printed in China allen + roth® is a registered trademark of LF, LLC.
welcoming allen + roth ® est une marque de commerce déposée de LF, LLC. Tous droits réservés. • sophisticated • inspiring ARTICLE #0982659 RAIL D’ÉCLAIRAGE DÉCORATIF À 3 AMPOULES MODÈLE #16103 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
CONTENU DE L’EMBALLAGE B A F C E D PIÈCE A B C D E F DESCRIPTION Couvercle Support de fixation Ensemble de DEL (préassemblé au bras(F)) Abat-jour Bague de douille (préassemblée à l’ensemble de DEL (C)) Bras (préassemblé au couvercle (A)) 10 QUANTITÉ 1 1 4 4 4 2
QUINCAILLERIE INCLUSE (grandeur réelle) AA BB Capuchon de connexion Vis à métaux Qté : 3 courte Qté : 2 CC DD Bouton fileté Qté : 2 Vis à métaux longue Qté : 2 EE Outil en U Qté : 1 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. • • • • • • AVERTISSEMENT IMPORTANT : Coupez l’électricité avant TOUTE manipulation. Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure.
PRÉPARATION Avant de commencer l’assemblage de l’article, assurez-vous d’avoir toutes les pièces. Comparez le contenu de l’emballage avec la liste de la quincaillerie incluse. S’il y a des pièces manquantes ou endommagées, ne tentez pas d’assembler l’article. Temps d’assemblage approximatif : de 30 à 60 minutes. Outils nécessaires pour l’assemblage (non inclus) : tournevis cruciforme, tournevis à tête plate, pinces à dénuder et ruban isolant, escabeau et lunettes de sécurité.
INSTRUCTIONS POUR L’ASSEMBLAGE 2. Guide pour la connexion des fils : FIL DE AAMISE À LA TERRE DU LUMINAIRE AA VERT OU EN CUIVRE DÉNUDÉ 2 Fil de mise à la terre : • Pour une installation aux États-Unis : Enroulez le fil de mise à la terre de la boîte de sortie autour de la vis de mise à la terre du support de fixation (B), à au moins 5,08 cm de l’extrémité du fil. Serrez la vis de mise à la terre.
INSTRUCTIONS POUR L’ASSEMBLAGE 4. Retirez la bague de douille (E) de la douille (C). Posez l’abat-jour (D) sur l’ensemble de DEL (C) et fixez le tout avec la bague de douille (D) à l’aide de l’outil en U (EE). 4 Répétez cette étape pour chaque douille (C). Quincaillerie utilisée EE Outil en U x1 C E EE ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif.
GARANTIE Le distributeur garantit ses articles contre les défauts de matériaux et de fabrication pour une période de un (3) an à compter de la date d’achat par l’acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, communiquez avec notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
welcoming • sophisticated allen + roth ® es una marca registrada de LF, LLC. Todos los derechos reservados. • inspiring ARTÍCULO #0982659 LUCES DECORATIVAS EN CARRIL DE 3 CABEZALES MODELO #16103 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.
CONTENIDO DEL PAQUETE B A F C E D PIEZA A B C D E F DESCRIPCIÓN Base Abrazadera de montaje Ensamblaje del LED (preensamblado en el brazo(F)) Pantalla Anillo del portalámpara (preensamblado al ensamble del LED (C)) Brazo (preensamblado en la base (A)) 18 CANTIDAD 1 1 4 4 4 2
ADITAMENTOS (se muestran en tamaño real) AA Conector de cable Cant.: 3 BB Tornillos para metales corto Cant.: 2 DD CC EE Perilla roscada Cant.: 2 Herramienta Tornillos para en U metales largo Cant.: 1 Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente realizar trabajo alguno sin desconectar la electricidad.
PREPARACIÓN Antes de comenzar a ensamblar el producto, asegúrese de tener todas las piezas. Compare las piezas con la lista del contenido del paquete y el diagrama. No intente ensamblar el producto si falta alguna pieza o si estas están dañadas. Tiempo estimado de ensamblaje: 30 minutos a 1 hora. Herramientas necesarias para el ensamblaje (no se incluyen): Destornillador Phillips, destornillador plano, pinzas pelacables, cinta aislante. INSTRUCCIONES DE ENSAMBLAJE 1.
INSTRUCCIONES DE ENSAMBLAJE 2. Guía para la conexión de los conductores: CONDUCTOR DE DE PUESTA A TIERRA DE LA LÁMPARA DE AA COBRE CONDUCTOR DE DESNUDO ALIMENTACIÓN O VERDE 2 Conductor de puesta a tierra: • Para la instalación en los Estados Unidos: Coloque el conductor de puesta a tierra de la caja de salida alrededor del tornillo de puesta a tierra en el soporte de montaje (B), a no menos de 5,08 cm del extremo del conductor. Apriete el tornillo de puesta a tierra.
INSTRUCCIONES DE ENSAMBLAJE 4. Retire el anillo del portalámpara (E) del portalámpara (C). Pase la pantalla (D) sobre el ensamble del LED (C) y asegure con anillo del portalámpara (D) y con ayuda de la herramienta en U (EE). 4 Repita el procedimiento para cada portalámpara (C). C Aditamentos utilizados EE E x1 Herramienta en U EE MANTENIMIENTO Y CUIDADO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar este artículo.
GARANTÍA El distribuidor garantiza que sus productos no presentará defectos de fabricación en el material o la mano de obra durante un período de un (1) año desde la fecha de su compra original.
LISTA DE PIEZAS DE REPUESTO Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves, de 8 a.m. a 6 p.m. hora estándar del Este y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.