Installation Guide

ASSEMBLY INSTRUCTIONS

TROUBLESHOOTING

Fixture does not light. 1. Fixture may be wired incorrectly.

1. Check wiring.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

• Always be certain that electric current is turned off before cleaning this item.

• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on

fixture, as it will damage the metal finish.

• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not

wash shades in an automatic dishwasher.

Remove socket ring (E) from socket (C). Pass

shade (D) over LED assembly (C) and secure

with socket ring (D) using U-tool (EE).

Repeat for each socket (C).

CARE AND MAINTENANCE

x 1

EE U-Tool

Hardware Used