Use & Care Guide
Care & Cleaning
Vacuuming:
Once a week will do. (More often in heavy trafc areas.) This is an effective
way to remove dirt before it becomes embedded in the pile of the carpet.
For best results, empty your vacuum bag when half full.
Preventative Measures:
Place absorbent mats at entrances to your home. Change or wash when
these mats become dirty.
Regularly change lters in your heating and air conditioning system.
Clean high-trafc areas periodically with a suitable cleaning agent.
Do not apply stain repellent treatments that contain any silicone, because
they tend to accelerate carpet soiling.
Spot & Stain Removal:
Always follow the manufacturer’s directions when using commercial
products.
Blot up liquids with paper towel or absorbent cloth. Scoop up solids with
the end of a knife or spoon.
Use a light, colorfast cotton cloth for the treatment of spots.
Treat the spot with a removal agent that is explicitly recommended for
cleaning carpets and rugs and leaves no sticky residue.
Always work from the outer edge towards the center to prevent spreading.
It is a good idea to replace the cotton cloth as soon as it’s soiled.
Carefully rinse the area with clean water and a sponge after having cleaned
it. Do not soak the carpet pile. Afterwards, blot as dry as possible with a
clean towel, or with a hairdryer.