Installation Guide
2
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A LED mirror 1
A
HARDWARE INCLUDED (not shown actual size)
AA BB CC DD
Mounting Screw Drywall Anchor Wire Connector Z-bar
Qty. 3 Qty. 3 Qty. 3 Qty. 1
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
1. Always disconnect the power supply prior to installing, servicing or removing the LED mirror.
2. Installation work and electrical wiring must be done by a qualied person(s) in accordance with all applicable
codes and standards, including re-rated construction.
3. Follow all local building, safety and electrical codes as well as NEC (National Electrical Code) and OSHA
(Occupational Safety and Health Act).
4. Electric service supply must be 120 volts, 60 hertz.
5. This product must properly connect to the grounding conductor of the supply circuit.
6. Do not bend or kink the power wires.
7. When cutting or drilling into the wall or ceiling, do not damage electrical wiring and other hidden utilities.
8. Avoid putting sharp or hard objects against mirror surface. Damage and/or injury may occur if punctured.
9. Turn off product during storms or power surge situations to avoid damage to internal components.