Installation Guide

4
AA
DD
BB
4
A
5
INSTALLATION INSTRUCTIONS (Continued)
3. Using a 7/32 in. drill bit (not included), drill holes in the wall where
marked and insert drywall anchors (BB).
Hardware Used
BB
Drywall anchor x 3
4. Place the Z-bar (DD) on the wall and insert the mounting screws
(AA) through the Z-bar (DD) and into the drywall anchors (BB).
Tighten the mounting screws (AA) until the z-bar (DD) is securely
attached to the wall.
Hardware Used
AA
Mounting screw x 1
DD
Z-bar x 3
5. Connect the white wire from the mirror (A) to the white wire from
the electrical box. Connect the black wire from the mirror (A) to the
black wire from the electrical box. Connect the green ground wire
from the mirror (A) to the ground wire from the electrical box. Cover
and secure each wire connection with a wire connector (CC).
Hardware Used
CC
Wire connector x 3
Mirror
House
Electrical
Wires*
black
black
white neutral
ground
live
white
green green
*House wires may vary
in color. Please be sure
to verify actual house
wires with a certied
electrician before
installation.
6. Carefully attach the mirror (A) to the z-bar (DD).
Once the mirror (A) is securely in place on the Z-bar (DD),
turn on the power at the circuit breaker or reinsert the fuse.
A
DD
6
BB
3