Installation Guide

ASSEMBLY INSTRUCTIONS

CONNECT, HOT, BLACK OR RED OUTLET SUPPLY WIRE TO: CONNECT, NEUTRAL, WHITE OUTLET SUPPLY WIRE TO:

Black White

* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)

Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductort

Hardware Used

x 2

Wire Connectors

*NOTE:

When parallel wire (SPT I & SPT II) is used.

The neutral wire is square shaped and ridged

and the hot wire will be round in shape and

smooth. (See Fig. 7.)

7. Supply wire connection guide: Make wire connections, securing with wire connectors (AA),

following the reference chart listed below.

x 1

Wire Connectors

Hardware Used

x 1

Mounting

Bracket

Ground

Screw

GND

6. Ground wire connection guide (see Fig. 6.):

• For installation in the United States:

Wrap ground wire from outlet box around

ground screw (FF) on mounting bracket (EE), no

less than 2 in. from wire end. Tighten ground

screw (FF). If fixture is supplied with a ground

wire, connect fixture ground wire to outlet ground

wire with a wire connector (AA).

• For installation in Canada:

If fixture is supplied with ground wire, wrap

ground wire around ground screw (FF) on

mounting bracket (EE). Tighten ground

screw (FF).

GND