welcoming • sophisticated allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. • inspiring ITEM #0759864 PENDANT MODEL #34807 Français p. 11 Español p. 21 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday. AB15811 1 Lowes.
PACKAGE CONTENTS B A D C H M I N J K F L E G PART DESCRIPTION A Canopy Mounting Bracket B C Threaded Nipple (preassembled) D Hex Nut (preassembled) Socket (preassembled) E F Arm (preassembled) Decorative Ring G QTY. 1 1 1 3 1 4 1 PART H I J K L M N 2 DESCRIPTION Screw Collar Ring Screw Collar Loop Coupling (preassembed) Chain Threaded Chain Link Fixture Loop Threaded Pipe Lowes.com/allenandroth QTY.
HARDWARE CONTENTS (shown actual size) AA Wire Connector Qty: 3 BB CC DD Threaded Knob Thumbscrew Short Qty: 4 Qty: 4 Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
ASSEMBLY INSTRUCTIONS 1. Before installing this fixture be sure to spread the arms (F) out evenly. 1a F 1b F 2. Raise the decorative ring (G) over the arms (F). Pass thumbscrew (DD) through the decorative ring (G) and arms (F) and secure with threaded knobs (CC). 2 F Hardware Used CC Threaded Knob DD Thumbscrew x4 x4 G Top Down View CC DD 4 Lowes.
ASSEMBLY INSTRUCTIONS 3. Secure fixture loop (M) onto threaded pipe (N). Screw threaded pipe (N) onto coupling (J). 3 M Note: Be sure to pull the fixture wires through the pipe and fixture loop, ensuring it is snug but not too tight. N J 4. Position threaded nipple (C) in mounting bracket (B) so that, when mounted: • • The threaded nipple (C) will protrude a minimum of 1/4 inch beyond the raised center portion of the bracket (B).
ASSEMBLY INSTRUCTIONS 6. Attach mounting bracket (B) to the outlet box with short machine screws (BB). Outlet Box 6 Hardware Used BB Short Machine Screw x2 B C BB 7. Thread chain (K) though screw collar ring (H) and canopy (A). Using the threaded chain links (L) on chain (K), attach one end to screw collar loop (I) and the other end to fixture loop (L). Weave the fixture electrical and ground wires through every other chain link and pass through threaded nipple (C) into outlet box.
ASSEMBLY INSTRUCTIONS 8. Wire connection guide: Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw preassembed on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 10. Insert 60-watt max. medium-base incandescent bulb or CFL/LED equivalent (none included) into socket (E). 10 E CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE 1.CORRECTIVE Check wiring. ACTION Fixture does not light. 1.
WARRANTY The Distributor warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Distributor the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.
welcoming • sophisticated allen + roth ® est une marque de commerce déposée de LF, LLC. Tous droits réservés. • inspiring ARTICLE #0759864 LUMINAIRE SUSPENDU MODÈLE #34807 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi. 11 Lowes.
CONTENU DE L’EMBALLAGE B A D C H M I N J K F L E G PIÈCE DESCRIPTION A Couvercle Support de fixation B C Tige filetée (préassemblé) D Écrou hexagonal (préassemblé) Douille (préassemblé) E F Bras (préassemblé) Anneau décoratif G QTÉ 1 1 1 3 1 4 1 PIÈCE DESCRIPTION Bague de collier à anneau H Collier à anneau de suspension I Raccord (préassemblé) J Chaîne K Maillon de chaîne fileté L M Anneau de suspension Tube fileté N 12 Lowes.
QUINCAILLERIE INCLUSE (grandeur réelle) AA BB Capuchon de connexion Vis à Qté : 3 métaux courte Qté : 2 CC Bouton fileté Qté : 4 DD Vis de serrage Qté : 4 CONSIGNES DE SÉCURITÉ Assurez-vous de lire et de comprendre l’intégralité du présent manuel avant de tenter d’assembler, d’installer ou d’utiliser l’article. • • • • • AVERTISSEMENT IMPORTANT : Coupez l’électricité avant TOUTE manipulation. Accédez au panneau central de disjoncteurs ou de fusibles de votre domicile.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Avant d’installer ce luminaire, assurez-vous d’ouvrir les bras (F) de façon à ce qu’ils soient tous placés de façon égale. 1a F 1b F 2. Soulevez l’anneau décoratif (G) au-dessus des bras (F). Insérez les vis de serrage (DD) dans l’anneau décoratif (G) et les bras (F), puis fixez-les à l’aide des boutons filetés (CC). 2 F Quincaillerie utilisée CC Bouton fileté DD Vis de serrage x4 G x4 Vue de dessus CC DD 14 Lowes.
INSTRUCTIONS POUR L'ASSEMBLAGE 3. Fixez l’anneau de suspension (M) sur le tube fileté (N). Vissez le tube fileté (N) au raccord (J). 3 M Remarque : Passez les fils du luminaire dans le tube et à travers l’anneau de suspension, puis tirez-les tout en vous assurant qu’ils sont bien en place, sans être trop tendus. N J 4.
INSTRUCTIONS POUR L'ASSEMBLAGE 6. Fixez le support de fixation (B) à la boîte de sortie à l’aide des vis à métaux courtes (BB). 6 Boîte de sortie Quincaillerie utilisée BB Vis à métaux courte x2 B C BB 7. Faites passer la chaîne (K) à travers la bague de collier à anneau (H) et le couvercle (A). À l’aide des maillons de chaîne filetés (L), fixez une extrémité de la chaîne (K) au collier à anneau de suspension (I) et l’autre extrémité à l’anneau de suspension (L).
INSTRUCTIONS POUR L'ASSEMBLAGE 8. Guide pour la connexion des fils Fil de mise à la terre : • Installation aux États-Unis : enroulez le fil de mise à la terre de la boîte de sortie autour de la vis de mise à la terre préassemblée au support de fixation (B), à au moins 5,08 cm de l’extrémité du fil. Serrez la vis de mise à la terre. Si le luminaire est muni d’un fil de mise à la terre, raccordez-le au fil de mise à la terre de la boîte de sortie à l’aide d’un capuchon de connexion (AA).
INSTRUCTIONS POUR L'ASSEMBLAGE 10. Insérez une ampoule incandescente à culot moyen d’un maximum de 60 W ou une ampoule fluocompacte ou à DEL équivalente (non incluses) dans la douille (E). 10 E ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyant pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. DÉPANNAGE PROBLÈME Le luminaire ne s’allume pas.
GARANTIE Le distributeur garantit ses articles contre les défauts de matériaux et de fabrication pour une période de un (1) an à compter de la date d’achat par l’acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, communiquez avec notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
welcoming • sophisticated allen + roth ® es una marca registrada de LF, LLC. Todos los derechos reservados. • inspiring ARTÍCULO #0759864 LÁMPARA COLGANTE MODELO #34807 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este. Lowes.
CONTENIDO DEL PAQUETE B A D C H M I N J K F L E G PIEZA DESCRIPCIÓN CANT. A Base 1 Soporte de montaje B 1 C Manguito roscado (preensamblado) 1 D Tuerca hexagonal (preensamblado) 3 Portalámpara (preensamblado) E 1 F 4 Brazo (preensamblado) Aro decorativo 1 G PIEZA H I J K L M N 22 DESCRIPCIÓN Aro de anilla roscada Enganche de anilla roscada Acoplador (preensamblado) Cadena Eslabón de cadena roscado Enganche de la lámpara Tubo roscado Lowes.com/allenandroth CANT.
ADITAMENTOS (se muestran en tamaño real) AA BB CC Perilla Conectores roscada de cables Tornillo Cant.: 4 Cant.: 3 para metale corto Cant.: 2 DD Tornillo de mariposa Cant.: 4 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico. Diríjase a la caja de fusibles principal o a la caja del interruptor de circuito en su hogar.
INSTRUCCIONES DE ENSAMBLAJE 1. Antes de instalar la lámpara, asegúrese de extender los brazos (F) de manera uniforme. 1a F 1b F 2. Levante el aro decorativo (G) sobre los brazos (F). Pase el tornillo de mariposa (DD) por el aro decorativo (G) y los brazos (F) y asegúrelos con las perillas roscadas (CC). 2 F Aditamentos utilizados CC Perilla roscada DD Tornillo de mariposa x4 x4 G Vista de arriba hacia abajo CC DD 24 Lowes.
INSTRUCCIONES DE ENSAMBLAJE 3. Fije el enganche de la lámpara (M) en el tubo roscado (N). Enrosque el tubo roscado (N) en el acoplador (J). 3 M Nota: Asegúrese de tirar los conductores de la lámpara por el tubo y el enganche de la lámpara y asegúrese de que esté ajustado, pero no demasiado. N J 4.
INSTRUCCIONES DE ENSAMBLAJE 6. Fije el soporte de montaje (B) a la caja de salida con los tornillos para metal cortos (BB). 6 Caja de salida Aditamentos utilizados BB Tornillo para metal corto x2 B C BB 7. Enrosque la cadena (K) al aro de la anilla roscada (H) y a la base (A). Usando los eslabones roscados de la cadena (L), sobre la cadena (K) fije un extremo al enganche de la anilla roscada (I) y el otro extremo al enganche de la lámpara superior (L).
INSTRUCCIONES DE ENSAMBLAJE 8. Guía para la conexión de los conductores: Conductor de puesta a tierra: • Para la instalación en los Estados Unidos: coloque el conductor de puesta a tierra de la caja de salida alrededor del tornillo de puesta a tierra preensamblado en el soporte de montaje (B), a no menos de 5,08 cm del extremo del conductor. Apriete el tornillo de puesta a tierra.
INSTRUCCIONES DE ENSAMBLAJE 10. Coloque una bombilla incandescente de base media de 60 vatios como máximo o una bombilla CFL/LED equivalente (ninguna se incluye) en el portalámpara (E). 10 E CUIDADO Y MANTENIMIENTO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar este artículo. • Utilice un paño húmedo suave y jabón suave no abrasivo para limpiar la lámpara. Nunca utilice un limpiador para vidrio en la lámpara porque este dañará el acabado metálico.
GARANTÍA El Distribuidor garantiza que sus productos no presentarán defectos en los materiales ni en la mano de obra durante un período de un (1) año desde la fecha de compra por parte del Comprador original.
LISTA DE PIEZAS DE REPUESTO Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.