welcoming • sophisticated allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. • inspiring ITEM #0810284 PENDANT MODEL #34829 Français p. 10 Español p. 19 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday. 1 allenandroth.
PACKAGE CONTENTS B A C D H I J M G K L F E PART DESCRIPTION A Canopy Mounting Bracket B C Threaded Nipple (preassembled) D Hex Nut (preassembled) Socket (preassembled) E F Coupling (preassembled) G Support Pipe QTY. 1 1 1 3 3 1 1 N PART DESCRIPTION QTY. 1 H Screw Collar Ring (preassembled) I Screw Collar Loop (preassembled) 1 J Fixture Loop 1 K 1 Chain L 1 Support Pipe Cover Support Pipe Top M 1 3 N 60-Watt Edison Bulb 2 allenandroth.
HARDWARE CONTENTS (shown actual size) AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es), that control the power to the fixture or room you are working in.
ASSEMBLY INSTRUCTIONS 1. Screw support pipe (G) onto coupling (F). Pass support pipe cover (L) over the support pipe (G). 1 G L F 2. Lower support pipe cover (M) over support pipe (G) and secure with fixture loop (J). 2 J M G 3. Position threaded nipple (C) in mounting bracket (B) so when mounted: • • The threaded nipple (C) will protrude a minimum of 1/4 inch beyond the raised center portion of the mounting bracket (B).
ASSEMBLY INSTRUCTIONS 4. Once the proper position of the threaded nipple (C) and mounting bracket (B) has been determined, secure with hex nuts (D) as follows: • • • Screw one hex nut (D) onto the threaded nipple (C) and tighten against the raised portion of the mounting bracket (B). Screw another hex nut (D) onto the threaded nipple (C) and tighten against the flat portion of the mounting bracket (B). Screw the remaining hex nut (D) onto threaded nipple (C) and tighten against the screw collar loop (I).
ASSEMBLY INSTRUCTIONS 7. Wire connection guide: Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw preassembled on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 9. Insert 60-watt max. Edison bulb (N) into socket (E). 9 Repeat for remaining sockets. E N CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher.
WARRANTY The Distributor warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Distributor the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.
welcoming • allen + roth ® est une marque de commerce déposée de LF, LLC. Tous droits réservés. sophisticated • inspiring ARTICLE #0810299 LUMINAIRE SUSPENDU MODÈLE #34828 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi. 10 allenandroth.
CONTENU DE L’EMBALLAGE B A C D H I J M G K L F E PIÈCE A B C D E F G DESCRIPTION Pavillon Support de fixation Raccord fileté (préassemblée) Écrou hexagonal (préassemblée) Douille (préassemblée) Raccord (préassemblée) Tube de soutien QTÉ 1 1 1 3 3 1 1 N PIÈCE DESCRIPTION QTÉ H Bague de l’anneau du pavillon (préassemblée) 1 I Anneau de suspension du pavillon (préassemblée) 1 J Anneau de suspension du luminaire 1 K 1 Chaîne L 1 Plaque de finition du tube de soutien M Capuchon de finition du tube de s
QUINCAILLERIE INCLUSE (grandeur réelle) AA BB Capuchon de connexion Vis à Qté : 3 métaux courte Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation. • Accédez au panneau central de disjoncteurs ou de fusibles de votre demeure et placez l’interrupteur principal en position d’arrêt (« OFF »).
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Vissez le tube de soutien (G) dans la raccord (F). Insérez la plaque de finition du tube de soutien (L) sur le tube de soutien (G). 1 G L F 2. Abaissez l'plaque de finition du tube de soutien (M) par-dessus la tube de soutien (G) et spuis fixez-le à l’aide des anneau de suspension du luminaire (J). 2 J M G 3.
INSTRUCTIONS POUR L'ASSEMBLAGE 4. Lorsque les positions correctes du raccord fileté (C) et du support (B) ont été déterminées, fixez à l'aide de 3 écrous hexagonaux (D), comme suit : • • • Vissez le 1er écrou hexagonal (D) sur le raccord fileté (C) et serrez-le contre la partie saillante du support (B). Vissez le 2e écrou hexagonal (D) sur le raccord fileté (C) et serrez-le contre la partie plate du support de fixation (B).
INSTRUCTIONS POUR L'ASSEMBLAGE 7. Guide de raccordement électrique 7 Fil de mise à la terre : • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre située sur le support de fixation (B), à au moins 5,08 cm de l’extrémité du fil. Serrez la vis de mise à la terre. Si le luminaire est muni d’un fil de mise à la terre, raccordez-le au fil de mise à la terre de la boîte de sortie à l’aide d’un capuchon de connexion (AA).
INSTRUCTIONS POUR L'ASSEMBLAGE 9. Insérez une ampoule Edison de 60 watts max. (N) dans la douille (E). 9 Répétez l'opération pour les douilles restantes. E N ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyant pour vitres; vous risqueriez d’endommager le fini métallique du luminaire.
GARANTIE Le distributeur garantit ses articles contre les défauts de matériaux et de fabrication pour une période de un (1) an à compter de la date d’achat par l’acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, communiquez avec notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
welcoming • sophisticated allen + roth ® es una marca registrada de LF, LLC. Todos los derechos reservados. • inspiring ARTÍCULO #0810299 ARAÑA DE 5 LUCES MODELO #34828 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este. 19 allenandroth.
CONTENIDO DEL PAQUETE B A C D H I J M G K L F E PIEZA DESCRIPCIÓN CANT A Cubierta 1 Soporte de montaje B 1 C Manguito roscado (preensamblado) 1 D Tuerca hexagonal (preensamblado) 3 3 Portalámpara (preensamblado) E F 1 Acoplamiento (preensamblado) 1 G Tubo de soporte N PIEZA DESCRIPCIÓN CANT H Anillo de cuello roscado (preensamblado) 1 I 1 Bucle de cuello roscado (preensamblado) J Bucle para colgar la lámpara 1 K 1 Cadena L 1 Cubierta del tubo de soporte M 1 Cachedel tubo de soporte 3 N Bombilla 60-W
ADITAMENTOS (se muestran en tamaño real) AA Conector de cables Cant.: 3 BB Tornillo de la cubierta Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico. Coloque el interruptor de alimentación principal en la posición “OFF” (APAGADO). Coloque el interruptor de la pared en la posición “OFF” (APAGADO).
INSTRUCCIONES DE ENSAMBLAJE 1. Screw support pipe (G) onto coupling (F). Pass support pipe cover (L) over the support pipe (G). 1 G L F 2. Atornille el tubo de soporte (G) al acoplamiento (F). Pase la cubierta del tubo de soporte (L) y fíjelas con los tubo de soporte (G). 2 J M G 3. Coloque el manguito roscado (C) en el soporte de montaje (B), de manera que al quedar montado: • • El manguito roscado (C) sobresalga un mínimo de 6.
INSTRUCCIONES DE ENSAMBLAJE 4. Una vez se haya determinado la posición adecuada del manguito roscado (C) y del soporte (B), fíjelos con 3 tuercas hexagonales (D) como se indica a continuación: • • • 4 1/4 pulgadas B C Atornille la primera tuerca hexagonal (D) al manguito roscado (C) y apriétela contra la porción que sobresale del soporte (B). Atornille la segunda tuerca hexagonal (D) al manguito roscado (C) y apriétela contra la porción plana del soporte de montaje (B).
INSTRUCCIONES DE ENSAMBLAJE 2. Guía de conexión de conductores: CONDUCTOR DE DE PUESTA A TIERRA DE LA LÁMPARA DE AA COBRE CONDUCTOR DE DESNUDO ALIMENTACIÓN O VERDE 2 Cable a tierra: • Para la instalación en los Estados Unidos: Enrolle el conductor a tierra de la caja eléctrica alrededor del tornillo a tierra en la abrazadera de montaje (B), a no menos de 5,08 cm del extremo del conductor. Apriete el tornillo a tierra.
INSTRUCCIONES DE ENSAMBLAJE 9. Inserte un foco Edison de máximo 60 W (N) en el portalámparas (E). 9 Repita para los portalámparas restantes (E). E N CUIDADO Y MANTENIMIENTO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar. • Utilice un paño húmedo suave y jabón suave no abrasivo para limpiar la lámpara. Nunca utilice un limpiador para vidrio en la lámpara, porque éste dañará el acabado metálico.
GARANTÍA El Distribuidor garantiza que sus productos no presentarán defectos en los materiales ni en la mano de obra durante un período de un (1) año desde la fecha de compra por parte del Comprador original.
LISTA DE PIEZAS DE REPUESTO Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.