Installation Guide

4
allenandroth.com
ASSEMBLY INSTRUCTIONS
3. Position threaded nipple (C) in mounting bracket
(B) so when mounted:
• The threaded nipple (C) will protrude a
minimum of 1/4 inch beyond the raised center
portion of the mounting bracket (B).
• The threaded nipple (C) height is
positioned so 1/2 the exterior threads of
the screw collar loop (I) will extend past the
canopy (A) when it is mounted.
Note: Canopy is only needed to
determine the position of the threaded nipple
and fixture loop. It will be installed later.
1. Screw support pipe (G) onto coupling (F). Pass
support pipe cover (L) over the support pipe (G).
2. Lower support pipe cover (M) over support pipe
(G) and secure with fixture loop (J).
3
B
A
1/4 Inch
I
C
G
F
L
1
J
G
2
M