Installation Guide

allenandroth.com
ASSEMBLY INSTRUCTIONS
5
4
1/4 Inch
D
C
I
B
4. Once the proper position of the threaded nipple
(C) and mounting bracket (B) has been
determined, secure with hex nuts (D) as follows:
• Screw one hex nut (D) onto the threaded
nipple (C) and tighten against the raised
portion of the mounting bracket (B).
• Screw another hex nut (D) onto the threaded
nipple (C) and tighten against the flat portion
of the mounting bracket (B).
• Screw the remaining hex nut (D) onto
threaded nipple (C) and tighten against the
screw collar loop (I).
Hardware Used
Short Machine
Screw
x 2
BB
5. Connect mounting bracket (B) to the outlet box
with short machine screws (BB).
5
Outlet Box
C
B
BB
6. Thread chain (K) though screw collar ring (H) and
canopy (A). Using the open chain links on chain
(K), attach one end to screw collar loop (I) and the
other end to upper fixture loop (J). Weave the fixture
electrical and ground wires through every other
chain link and pass through threaded nipple (C) into
outlet box. Lower the screw collar ring (H) and
canopy (A) over the chain (K).
J
H
A
K
I
C
6
Outlet
Box