Installation Guide

FINAL ASSEMBLY INSTRUCTIONS

Lowes.com/allenandroth

6. Feed the wires from the motor assembly (F) through

the center hole in the light kit housing (G).

Position keyhole slots on light kit housing (G)

around the loosened mounting screws and twist

clockwise. Re-install the previously removed

mounting screw, then tighten all screws securely.

7. Remove one of the preassembled screws from the

light kit housing (G) and loosen but do not remove

the other two screws.

8. Connect wires from the motor assembly (F) to the

light kit (H) - WHITE to WHITE and BLACK to

BLACK.

Position keyhole slots on light kit (H) around the

loosened screws and twist it clockwise. Re-install the

previously removed screw, then tighten all screws

securely.