Installation Guide

IS35691-I2

PREPARATION

Before cutting, drilling or hammering into any wall surface, verify the location of electrical, plumb-

ing and gas lines. Cutting any of these may cause serious injury. If needed, contact your electri-

cian, plumber or service person.

Two people are recommended for a safe, easy installation.

WARNING

Before beginning assembly of the product, make sure all parts are present. Compare parts with

package

contents list and hardware contents above. If any part is missing or damaged, do not

attempt to assemble the product.

Please read and understand this entire manual before attempting to assemble, operate or install

the product.

SAFETY INFORMATION

Estimated Assembly Time:

30 minutes (with recommended two-person installation)

Tools Required for Assembly (not included): Drill and Bit, Phillips Screwdriver, Hammer and Level

NOTE: Use a

9/32 in.

drill bit for drywall anchor installation. Use a

5/64 in.

drill bit for direct stud

installation. If installing into a different mounting surface, consult a professional for

proper installation.

ASSEMBLY INSTRUCTIONS

Measure the tub opening.