Installation Guide

4
Lowes.com/allenandroth
Short Machine
Screw
x 2
x 1
BB
EE
Mounting
Bracket
Hardware Used
BB
Outlet Box
(Not Included)
EE
x 2
Long
Machine
Screw
DD
1
DD
1. Insert long machine screws (DD) into the
mounting bracket (EE) before connecting
to the outlet box (not included). The two long
machine screws (DD) should protrude through
mounting bracket (EE) for securing canopy (A)
in later steps. Connect the mounting bracket
(EE) to the outlet box with short machine
screws (BB).
Hardware Used
x 1Wire Connector
AA
EE
FF
2
GND
AA
GND
GND
2. Wire connection guide:
Ground wire:
• For installation in the United States:
Wrap ground wire from outlet box around
ground screw (FF) on mounting bracket (EE)
no less than 2 in. from wire end. Tighten
ground screw (FF). If fixture is supplied with
a ground wire, connect to outlet ground wire
with a wire connector (AA).
• For installation in Canada:
If fixture is supplied with ground wire, wrap
ground wire around ground screw (FF) on
mounting bracket (EE). Tighten ground
screw (FF).
ASSEMBLY INSTRUCTIONS