Installation Guide

ASSEMBLY INSTRUCTIONS

x 2

x 1

x 2

Hardware Used

3. Insert two 1-1/2 in. machine screws (CC) into the

mounting bracket (DD) before connecting to the

outlet box. The two 1-1/2 in. machine screws (CC)

should protrude through mounting bracket (DD)

for securing canopy (A) in later steps. Connect the

mounting bracket (DD) to outlet box with 1/2 in.

machine screws (BB). Orient the mounting

bracket (DD) so that the raised center portion

protrudes into the outlet box. (See Fig. 3.)

1/2 in. Machine

Screws

1-1/2 in.

Machine

Screws

Mounting

Bracket

x 1

Wire Connectors

Hardware Used

x 1

Mounting

Bracket

Ground

Screw

4. Ground wire connection guide (see Fig. 4.):

• For installation in the United States:

Wrap ground wire from outlet box around

ground screw (EE) on mounting bracket (DD), no

less than 2 in. from wire end. Tighten ground

screw (EE). If fixture is supplied with a ground

wire, connect fixture ground wire to outlet ground

wire with a wire connector (AA).

• For installation in Canada:

If fixture is supplied with ground wire, wrap

ground wire around ground screw (EE) on

mounting bracket (DD). Tighten ground

screw (EE).

GND

Outlet Box

(Not Included)