Installation Guide

CONNECT, HOT, BLACK OR RED OUTLET SUPPLY WIRE TO: CONNECT, NEUTRAL, WHITE OUTLET SUPPLY WIRE TO:
Black White
* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor
x 2
1-1/2 in.
Machine
Screws
CC
x 1
DD
Mounting
Bracket
7. Insert CFL bulbs (G) into bi-pin sockets (B).
(See Fig. 7.)
ASSEMBLY INSTRUCTIONS
Hardware Used
6
6
7
5
Hardware Used
x 2Wire Connectors
AA
CC
DD
6. Pass the mounting pan (A) over the 1-1/2 in. machine
screws (CC) protruding from the mounting bracket
(DD). Turn clockwise in keyhole and tighten 1-1/2 in.
machine screws (CC). (See Fig. 6.)
*NOTE:
When parallel wire (SPT I & SPT II) is used.
The neutral wire is square shaped and ridged
and the hot wire will be round in shape and
smooth. (See Fig. 5.)
5. Supply wire connection guide: Make wire connections, securing with wire connectors (AA),
following the reference chart listed below.
CC
G
GND