Installation Guide

4
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
1. Fasten mounting brackets (BB) to shelf (A) and
towel bar (B) with hex-head screws (AA).
NOTE: Drain holes located on towel bar (B)
should be on the bottom.
2. Hold the unit level at the desired position on
the wall.
Mark the locations of the screw holes on the
wall, then set aside assembly. If you are not
installing the product to studs, hammer wall
anchors (CC) into the wall at marked locations.
NOTE: Wall anchors (CC) should be oriented
with the at side horizontal.
For stud installations, drill 5/64 in. pilot holes at
marked locations.
Place assembly back against wall and insert
mounting screws (DD) into wall anchors (CC)
or into drilled holes.
1
2
Hex-Head Screw
Mounting Bracket
Wall Anchor
Mounting Screw
x 4
x 2
x 4
x 4
AA
BB
CC
DD
A
B
BB
AA
BB
CC
DD
IS9007-I2
Lowes.com