welcoming allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. • sophisticated • inspiring ITEM #0810111 FLUSHMOUNT CEILING FIXTURE MODEL #B10109 Français p. 8 Español p. 15 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday.
PACKAGE CONTENTS B A C D PART A B C D DESCRIPTION Canopy Mounting Bracket Socket (preassembled to canopy (A)) Fixture Body 2 QUANTITY 1 1 1 1
HARDWARE CONTENTS (shown actual size) AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 CC DD Threaded Knob Qty: 2 Long Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity.
ASSEMBLY INSTRUCTIONS 1. Orient the mounting bracket (B) so the raised center portion protrudes into the outlet box (not included). Insert long machine screws (DD) through mounting bracket (B) so they protrude outward. Connect the mounting bracket (B) to the outlet box with short machine screws (BB). 1 Outlet Box Hardware Used BB Short Machine Screw x2 Long Machine Screw x2 DD DD 2.
ASSEMBLY INSTRUCTIONS 3. Pass canopy (A) over the long machine screws (DD) protruding from the mounting bracket (B) and secure with threaded knobs (CC). 3 B DD Hardware Used Threaded CC Knobs x2 A CC 4. Insert 60-watt max. medium-bulb or Edison/CFL/LED equivalent (none included) into socket (E). 4 Repeat for remaining sockets. CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item.
WARRANTY The Distributor warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Distributor the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 6 p.m., EST, Monday - Thursday, 8 a.m. – 5 p.m., EST, Friday. PART B AA BB CC DD B DESCRIPTION Mounting Bracket Wire Connector Short Machine Screw Threaded Knob Long Machine Screw AA PART # XBAR05 WC001 SCR832X050 TK1X832-LAB SCR832X150 BB Rev.
welcoming • sophisticated allen + roth ® est une marque de commerce déposée de LF, LLC. Tous droits réservés. • inspiring ARTICLE #0810111 PLAFONNIER ENCASTRÉ MODÈLE #B10109 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
CONTENU DE L’EMBALLAGE B A C D PIÈCE A B C D DESCRIPTION Couvercle Support de fixation Douille (Préassemblé à la couvercle (A)) Corps du luminaire 9 QUANTITÉ 1 1 1 1
QUINCAILLERIE INCLUSE (grandeur réelle) AA Capuchon de connexion Qté : 3 BB Vis à métaux courte Qté : 2 CC DD Bouton fileté Qté : 2 Vis à métaux longue Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation.
INSTRUCTIONS POUR L’ASSEMBLAGE 1. Orientez le support de fixation (B) de façon à ce que la partie centrale surélevée sorte du côté de la boîte de sortie (non incluse). Insérez les vis à métaux longues (DD) à travers le support de fixation (B) de façon à ce qu’elles dépassent de la boîte de sortie. Fixez le support de fixation (B) à la boîte de sortie à l’aide des vis à métaux courtes (BB). 1 Boîte de sortie Quincaillerie utilisée BB Vis à métaux courte x2 Vis à métaux longue x2 DD 2.
INSTRUCTIONS POUR L’ASSEMBLAGE 3. Placez le couvercle (A) sur les vis à métaux longues (DD) qui sortent du support de fixation (B) et fixez-le à l’aide des boutons filetés (CC). 3 B DD Quincaillerie utilisée Bouton CC fileté x2 A CC 4. Insérez une ampoule à culot moyen d’un maximum de 60 watts ou une ampoule fluocompacte, à DEL ou à culot à vis équivalente (non incluses) dans la douille (E). 4 Répétez cette étape pour les douilles restantes.
GARANTIE Le distributeur garantit ses articles contre les défauts de matériaux et de fabrication pour une période de un (1) an à compter de la date d’achat par l’acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, communiquez avec notre service à la clientèle au 1 866 439-9800, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi. PIÈCE B AA BB CC DD B DESCRIPTION Support de fixation Capuchon de connexion Vis à métaux courte Bouton fileté Vis à métaux longue AA BB Nº DE PIÈCE XBAR05 WC001 SCR832X050 TK1X832-LAB SCR832X150 CC DD Imprimé en Chine Rev.
welcoming • sophisticated allen + roth® es una marca registrada de LF, LLC. Todos los derechos reservados. • inspiring ARTÍCULO #0810111 LÁMPARA DE TECHO DE MONTAJE AL RAS MODELO #B10109 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este. 15 Lowes.
CONTENIDO DEL PAQUETE B A C D PIEZA A B C D DESCRIPCIÓN Base Soporte de montaje Tomacorrientes (Preensamblado a la base (A)) Cuerpo de la lámpara 16 CANTIDAD 1 1 1 1 allenandroth.
ADITAMENTOS UTILIZADOS (se muestran en tamaño real) AA Conector de cables Cant.: 3 BB Tornillos para metales cortos Cant.: 2 DD CC Perilla roscada Cant.: 2 Tornillos para metales largos Cant.: 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico.
INSTRUCCIONES DE ENSAMBLAJE 1. Dirija el soporte de montaje (B) para que la parte central elevada se interne en la caja de salida (no incluida). Inserte los tornillos para metal largos (DD) en el soporte de montaje (B) para que sobresalgan. Conecte el soporte de montaje (B) a la caja de salida con tornillos para metal cortos (BB). 1 Caja de salida Aditamentos utilizados BB Tornillos para metales cortos x2 Tornillos para metales largos x2 DD DD 2.
INSTRUCCIONES DE ENSAMBLAJE 3. Coloque la base (A) sobre los tornillos para metal largos (DD) que sobresalen del soporte de montaje (B) y asegúrela con las perillas roscadas (CC). 3 B DD Aditamentos utilizados Perilla CC roscada x2 A CC 4. Inserte una bombilla con casquillo medio máx. 60 vatios, o equivalente CFL/LED/Edison (no incluidas) en el tomacorrientes (E). 4 Repita el procedimiento para los tomacorrientes restantes.
GARANTÍA El distribuidor garantiza que sus productos no presentará defectos de fabricación en el material o la mano de obra durante un período de un (1) año desde la fecha de su compra original.
LISTA DE PIEZAS DE REPUESTO Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 1-866-439-9800, de lunes a jueves, de 8 a.m. a 6 p.m. hora estándar del Este y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.