Installation Guide

ASSEMBLY INSTRUCTIONS
6
Attach mounting strap (D) to outlet box
(not included) using existing washers and outlet
box screws or the machine screws (BB). NOTE:
If the outlet box screws required for your outlet
box are of a different size than the machine
screws (BB), consult a licensed electrician
before proceeding. Tighten machine screws (BB)
to secure mounting strap (D).
CAUTION: The fixture must be mounted to
an outlet box that is supported by the building
structure. Plastic outlet boxes are not
recommended.
4.
Carefully remove shade (B) from fixture (A) by
removing screws (C) from the edges of the
fixture (A). Remove packing material from shade
(B) and dispose of packing material.
Save screws (C) for later use.
3.
B
Insert fixture screws (CC) two full turns into
screw holes on the mounting strap (D).
x 2
Fixture Screw
CC
4
Outlet
Box
CC
BB
D
Hardware Used
Machine Screw
x 2
BB
3
C
C
A