Installation Guide

ASSEMBLY INSTRUCTIONS
7
6.
Wrap electrical tape (not included) around
each individual wire connector (AA) down
to the wire. Push wire connectors (AA)
gently back into outlet box. Carefully push
excess wiring into outlet box.
WARNING: Make sure no bare wire or
wire strands are visible after making
connections.
5.
Unwrap BARE fixture wire from BLACK and WHITE
fixture wires. Prepare wires by stripping 3/4 in. of
insulation from wire ends using wire strippers (not
included). Connect WHITE wire from fixture (A) to
WHITE wire from outlet box using existing wire
connector or wire connector (AA). Connect BLACK
wire from fixture (A) to BLACK wire from outlet box
using existing wire connector or wire connector (AA).
Connect BARE/GREEN ground wire from outlet box
to BARE ground wire from fixture (A) with wire
connector (AA).
NOTE: Screw wire connectors (AA) on in a clockwise
direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA) are
designed to accept only one 12-gauge house wire
and two lead wires from the light fixture. If your
house wire is larger than 12-gauge or there is more
than one house wire to connect to the corresponding
fixture lead wires, consult an electrician for the
proper size wire connectors to use.
Hardware Used
Wire Connector
x 3
AA
BARE/
GREEN
5
A
Outlet Box
AA
WHITE
AA
BLACK
AA
6
A
Outlet Box
AA
AA
AA