Installation Guide

Prepare wire by stripping 1/2 in. of insulation from
wire ends using wire strippers (not included).
Unwrap BARE wire from BLACK and WHITE wires.
Connect WHITE wire from fixture (A) to WHITE wire
from outlet box using existing wire connector or wire
connector (AA). Connect BLACK wire from fixture
(A) to BLACK wire from outlet box using existing
wire connector or wire connector (AA). Connect
BARE/GREEN ground wire from outlet box to BARE
wire from fixture (A) using existing wire connector or
wire connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect ground wire to
WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA)
provided with this light fixture are designed to
accept only one 12-gauge house wire and two lead
wires from the light fixture. If your house wire is
larger than 12-gauge or there is more than one
house wire to connect to the corresponding fixture
lead wires, consult an electrician for the proper size
wire connectors to use.
6
ASSEMBLY INSTRUCTIONS
4a.
x 3
Hardware Used
Wire Connector
AA
4a
Outlet Box
BARE/
GREEN
WHITE
BLACK
BARE
AA
AA
B
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
Push wire connectors (AA) gently back into outlet
box. Carefully push excess wiring into outlet box.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
4b.
4b
A
WHITE
BLACK
Outlet Box
AA
AA
B
A