Installation Guide
![](/manual/allen-roth/cll7bnkb/installation-guide-english/images/img-7.png)
5.
6.
7
Align notches on the mounting plate (B) with tabs
on fixure (A). Twist fixture (A) clockwise until
fixture (A) locks into place and is secure. [NOTE:
This may require some force.]
6
5
ASSEMBLY INSTRUCTIONS
CARE AND MAINTENANCE
• Shut off main power supply. Wipe fixture with soft cloth. Use window cleaner to clean glass. Do not
use an abrasive cleaner on glass or fixture.
• Total wattage for this fixture is 16 watts; do not attempt to replace the LEDs.
Restore power and test fixture (A).
If light does not function, please refer to
TROUBLESHOOTING on the following page.
A
B