Installation Guide

OPERATING INSTRUCTIONS
GAS CYLINDER INSTALLATIONS
11
3
Secure the gas cylinder by tightening the bolts
found on the gas cylinder support (L) clockwise
so that the gas cylinder cannot move from side to
side or fall down. Close the door (B).
3.
2
black handle
Connect the regulator. Screw the black handle
clockwise to tighten, turn the black handle
counterclockwise to remove. The hose must
point down. The knob on the control panel is
turned all the way to the “OFF” position when the
fire pit is NOT in use.
2.
1
Open the door (B) and place the gas cylinder
(not included) into gas cylinder support (L).
1.
L
B
L
B
bolt