Installation Guide

lowes.com/allenandroth
4
MOUNTING BRACKET INSTALLATION
1. Center and place the mounting bracket (A)
over the existing junction box opening. Mark all
four screw hole locations. Make sure mounting
bracket (A) is oriented as shown.
2. After removing mounting bracket, drill a 1/4 in.
hole at each marked location. Next install a wall
anchor (AA) in each hole location.
1
2
1
A
2
AA
1
2
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to install
the product.
Estimated Installation Time: 30 minutes.
Tools Required for Installation (not included): pencil, screwdriver, drill, 1/4 in drill bit (6.5 mm).
Hardware Used
Wall anchor
x 4
AA