Installation Guide

4
Hardware Used
CC
x 2
Mounting
Screw
EE
x 2
Hex Nut
1. Place the crossbar (A) onto the backplate of
the fixture body (B) and align the holes in the
canopy with a set of threaded holes in the
crossbar (A). Install the mounting screws
(CC) in the aligned threaded holes on the
crossbar (A) and thread the hex nuts (EE)
onto the mounting screws (CC) as shown.
1
ASSEMBLY INSTRUCTIONS
A
CC
EE
B
DD
2. Secure the crossbar (A) to the outlet box (not
included) with outlet box screws (DD).
Hardware Used
2
Outlet Box
A
DD
DD
x 2
Outlet Box
Screw
Lowes.com/allenandroth