Installation Guide

ASSEMBLY INSTRUCTIONS

Prepare wires by stripping 3/4 in. of insulation from

wire ends using wire strippers (not included).

Connect WHITE wire from fixture (A) to WHITE wire

from outlet box using existing wire connector or wire

connector (AA). Connect BLACK wire from fixture (A)

to BLACK wire from outlet box using existing wire

connector or wire connector (AA). Connect

BARE/GREEN ground wire from outlet box to BARE

ground wire from fixture (A) with wire connector (AA).

NOTE: Screw wire connectors (AA) on in a clockwise

direction.

WARNING: Never connect ground wire to

WHITE or BLACK power supply wires.

WARNING: To reduce the risk of fire, electrical

shock or personal injury, wire connectors (AA) are

designed to accept only one 12-gauge house wire

and two lead wires from the light fixture. If your

house wire is larger than 12-gauge or there is more

than one house wire to connect to the corresponding

fixture lead wires, consult an electrician for the

proper size wire connectors to use.

Hardware Used

Wire Connector

x 3

Wrap electrical tape (not included) around

each individual wire connector (AA) down

to the wire. Push wire connectors (AA)

gently back into outlet box. Carefully push

excess wiring into outlet box.

WARNING: Make sure no bare wire or

wire strands are visible after making

connections.

Outlet Box

BLACK

BARE/GREEN

WHITE