User Manual Ventilated Closet Kit

ManualsBrandsallen + roth ManualsWood Closet Kits8-ft W x 6.6-ft H Antique Gray Wood Closet Kit

6 7

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

Hardware Used

1. Press the release lever on slides (Q) and remove slide

runners.

4. Attach slides (Q) to lower left side panel (C) and

lower right side panel (D), securing with M6 x 10 mm

screws (PP).

2. Insert large wood dowels (GG) into mounting

cleats (H).

5. Insert barrel nut (HH) into mounting cleat (H).

Secure mounting cleat (H), beveled edge down, to

upper right side panel (B) and lower right side panel (D)

where shown with lock washers (CC), small at

washers (DD) and M6 x 60 mm bolts (BB). Then, attach

the middle xed shelf (G) and top/bottom xed shelf (E)

to upper right side panel (B) and lower right side panel

(D) with lock washers (CC), small at washers (DD) and

M6 x 40 mm bolts (AA). Tighten all connections with

allen wrench (SS).

3. Insert barrel nuts (HH), large wood dowels (GG)

and large cam bolts (WW) into upper left side panel

(A) and upper right side panel (B) as shown. Then,

attach upper left side panel (A) and upper right side

panel (B) to lower left side panel (C) and lower right

side panel (D). Insert large cam locks (VV) into lower

left side panel (C) and lower right side panel (D) to

secure panel assembly.

6. Repeat step 5 for upper left side panel (A) and

lower left side panel (C).

2 5

3 6

M6 x 40 mm Bolt

M6 x 60 mm Bolt

Lock Washer

Small Flat Washer

Barrel Nut

Large Wood Dowel

Barrel Nut

Large Cam Lock

Large Cam Bolt

M6 x 10 mm Screw

x 7

x 1

x 8

x 1

x 4

Release Lever

Lowes.com/allenandroth

Note: Save the slide runner for the drawer

assembly (Step 11, page 9). The self closing slide (Q)

will be installed in step 4 below.

Allen Wrench

x 1

Beveled edge facing

bottom of unit