User Manual Ventilated Closet Kit

8 9

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

Hardware Used

9. Insert drawer bottom panel (P) into drawer left

panel (M), drawer right panel (N) and drawer back

panel (O).

7. Set assembly upright. Insert shelf pins (EE)

level where desired in tower, then rest adjustable

shelves (F) on top.

Note: Ensure the shelf pins (EE) are level.

10. Insert small wood dowels (OO) into drawer left

panel (M) and drawer right panel (N). Attach drawer

front (L), securing with small cam locks (MM).

8. Install small cam bolts (NN) into drawer front (L).

Set aside. Install small wood dowels (OO) into drawer

back panel (O), then attach drawer left panel (M) and

drawer right panel (N) to drawer back panel (O) with

M4 x 25 mm screws (QQ).

11. Attach the previously removed slide runners to

drawer left panel (M) and drawer right panel (N) with

M3.5 x 12 mm wood screws (FF). Then, remove

preassembled bolt from handle (LL). Insert drawer

handle (LL) into drawer front (L), securing with

previously removed bolt.

Small Cam Lock

Small Wood Dowel

Shelf Pin

Small Cam Bolt

Small Wood Dowel

M4 x 25 mm Screw

M3.5 x 12 mm Wood Screw

Handle

x 4

x 8

x 4

x 6

x 1

Lowes.com/allenandroth

12. Insert the drawer into the assembly by pressing

down the release levers on the slide runners and sliding

the drawer into the tracks of self closing slides (Q).