Assembly Instructions

10 11
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
Hardware Used Hardware Used
10. Attach hutch panel left (A) and hutch panel right (B) to
hutch panel back (D) and either front curved stretcher (E)
or front straight stretcher (F) -- depending on which fi ts
your closet look -- using large wood dowels (HH) and large
cam locks (DD). From the back of the assembly, use fl at
washers (CC), lock washers (BB) and bolts (AA) to secure
unit. Tighten with Allen wrench (WW).
Then, secure assembly with large cam locks (DD).
Note: Make sure previously inserted medium cam bolts
(EE) are completely seated.
12. Carefully rest hutch assembly on its side. Insert
barrel nuts (VV) and large cam bolts (UU) into the
bottom of the hutch assembly.
13. Insert large wood dowels (HH) and large cam locks
(DD) into the base panel top (J). Then, with the help of
another person, attach the hutch assembly to the base
assembly, tightening the large cam locks (DD) to secure
the unit.
Note: Make sure previously inserted large cam bolts (UU)
are completely seated.seated.
11. Insert wood dowels (HH) and large cam locks
(DD) into hutch assembly. Attach hutch panel top (C),
tightening large cam locks (DD) to secure assembly.
14. Install small cam bolts (GG) into drawer front (P).
Set aside. Install small wood dowels (II) into drawer
back panel (S), then attach drawer left panel (R) and
drawer right panel (Q) to drawer back panel (S) with
M4 x 25 mm wood screws (LL).
10 12
13
11 14
Bolt
x 6
AA
C
DD
F
E
HH
HH
HH
DD
E
B
Back Side
Lock Washer
x 6
BB
Flat Washer
x 6
CC
Large Cam Lock
x 6
DD
Large Cam Lock
x 8
DD
Large Wood Dowel
x 8
HH
Large Cam Bolt
x 4
UU
Barrel Nut
x 4
VV
HH
B
Base
P
Q
S
GG
Small Cam Bolt
x 4
GG
AA
BB
CC
HH
DD
A
B
D
D
A
Back Side
Large Wood Dowel
x 6
HH
B
A
VV
UU
UU
A
H
I
DD
J
Hutch
Large Cam Lock
x 4
DD
Large Wood Dowel
x 4
HH
II
LL
II
LL
R
Small Wood Dowel
x 4
II
M4 x 25 mm Wood
Screw
x 4
LL
Lowes.com/allenandroth Lowes.com/allenandroth
Allen Wrench
x 1
WW
Drawer Assembly