INSTALLATION Owner manual

AlliedView™-EMS 4.0 INSTALLATION GUIDE Page 18 of 29
8 INTEGRATING ALLIEDVIEW-EMS 4.0 WITH NETVIEW
The AlliedView-EMS 4.0 installer automatically detects if NetView is installed and will perform the
necessary integration so that AlliedView-EMS 4.0 can be started from within NetView. After
integration, the “AlliedView-EMS” submenu is added to the “Tools” menu. “AlliedView-EMS”
contains the options “Device Manager” and “AMIGO”.
After installing AlliedView-EMS 4.0, NetView does not immediately update its maps to show Allied
Telesis icons. You can use the “Demand Poll” selection from the “Test” menu to force NetView to
refresh its maps or wait for NetView to complete its scheduled “Polling for Node Configuration”.
You can also change the default period of the “Polling for Node Configuration” in order for the
discover node configuration to take effect immediately.
To start AlliedView-EMS for an Allied Telesis device, follow the steps below:
1. Select an Allied Telesis device on the network map.
2. Select Tools>AlliedView-EMS>Device Manager or AMIGO.
3. Device Manager or AMIGO will be launched.