INSTALLATION Owner manual

AlliedView™-EMS 4.0 INSTALLATION GUIDE Page 19 of 29
9 INTEGRATING ALLIEDVIEW-EMS 4.0 WITH WHATSUP
The AlliedView-EMS 4.0 installer automatically detects if WhatsUp is installed and will perform the
necessary integration so that AlliedView-EMS 4.0 can be started from within WhatsUp. After
integration, the options “AlliedView-EMS Device Manager” and “AlliedView-EMS AMIGO” are added
to the device context menu.
To start AlliedView-EMS for an Allied Telesis device, follow the steps below:
1. Select an Allied Telesis device on the network map.
2. Right click on the device icon then choose AlliedView-EMS Device Manager or
AlliedView-EMS AMIGO.
3. Device Manager or AMIGO will be launched.
Note - There are two Allied Telesis device icons used in WhatsUp – the “WA7500” device icon used
for the AT-WA750x devices and the “ATI” device icon used for all other Allied Telesis devices.