user manual

AT-TQ2403 Management Software User's Guide 139
Figure 52: SNMP Setting Diagram
Supported MIBs
MIBs are a collection of objects or files that exist in a virtual database on a network. SNMP uses a specific
set of commands and queries to obtain information from the MIB.
The AT-TQ2403 Management Software supports standard and proprietary SNMP MIBs as shown in the
following table. The MIB definitions are included with this documentation. If you are viewing this page
online, you can click each MIB name to link to the associated MIB definition.
Table Supported MIBs
C ategory MIB Le vel of Su pport
Standard IEEE MIB IEEE802dot11-MIB Partial support, read-only.
The following OIDs are not implemented:
WEPKeyMappingsTable
GroupAddressesTable
ResourceTypeIDName
PhyAntennaTable
PhyFHSSTable
PhyIRTable
AntennasList
PhyOFDMTable
PhyHRDSSSTable
HoppingPatternTable