user manual

AT-TQ2403 Management Software User's Guide 27
Chapter 3: Configuring Basic Settings
The basic configuration tasks are described in the following sections:
 Navigating to Basic Settings
 Review / Describe the Access Point
 Provide Network Settings
 Update Basic Settings
 Basic Settings for a Standalone Access Point
 Setting User Interface Scheme Preferences
 Navigation
Navigating to Basic Settings
To configure initial settings, click Basic Settings.
If you type the IP address of the access point into you browser, the Basic Settings page is the default page
that is displayed.
Fill in the fields on the Basic Settings screen as described below.
Figure 6: Basic Settings Page